Contact Us
Corner piece
Keywords：
Category：
WhatsApp / Wechat
Introduction
Container corner pieces play a key role in the lifting, handling, fixing, stacking and tethering of containers.As the outermost edge of the box, the corners also play a role in protecting the entire box.When handling containers, firmness and stability are very important. The container is suspended in the air when handling. When the container is suspended in the air, if the stability is poor, the container can easily roll over, and the internal cargo of the container will be damaged.The corners of the container are evenly distributed in the four corners of the container. The steel cable passes through the corners of the container on the four corners and is knotted in the center of the container. Then when handling the container, the container will always be presented in a horizontal posture in the air, then the cargo sliding in the container will be relatively small.Therefore, corner pieces play a great role in the usual handling of containers.
Advantage
Hebei Kuncheng Container Co., Ltd.
We are a container general contracting manufacturer integrating design, manufacturing,
transportation, installation and construction, and after-sales service.
Manufacturer strength
The production workshop is more than 3,000 square meters, and the annual production of more than 2,000 special containers.
Equipment quality
We have a complete container manufacturing process for the production line operation process.
Product quality
The company has passed ISO9001, ISO14001, ISO45001 certification, factory accreditation certificate, and inspection certificate.
Support customization
Accept non-standard customization of containers to ensure that every customer has a suitable product.
About us
Hebei Kuncheng Container Co., Ltd. is located in the Beijing-Tianjin-Hebei Integrated Economic Development Free Trade Zone. The company covers an area of 26,000 square meters, including a production workshop of more than 3,000 square meters.It has the general contracting and professional manufacturing capabilities of supporting services such as design, manufacturing, transportation, installation and construction, and after-sales service, and has the right to import and export foreign trade.The company produces more than 2,000 special containers annually.
The company mainly designs and produces special types of containers and standard containers.
Process flow
The manufacture of containers is a production line operation, and its process flow can be roughly divided into the following stages：
1. Incoming inspection of raw materials, cutting, and surface treatment of steel (one-time sanding of steel plates, spraying of epoxy zinc-rich primer)
2. Folding plate, stamping and forming
3. Welding and assembly of components (front and rear frames, side panels, top panels, chassis), welding and assembly of the whole box
4. The whole box of slag cleaning and secondary sanding (after the secondary shot peening surface treatment, the weld area, the welding heat-affected area, and other surfaces that require secondary shot blasting, the roughness requirements reach BN9-BNl0 (Ry value 25µ-35µ), and the rust removal level reaches Sa2.Level 5 (approximately white iron shape), cleaning
5. Spraying (black primer spraying should be after the floor is installed), paint drying
6. Installation of spare parts (locks, air inlet blinds, breathable covers, etc.), beauty (spraying or labeling, nameplates, interior repairs), wind and rain density experiments, finished product inspection, warehousing
Our certificate
Previous：
Next：
Get Quote
*Contact us now, starting from the first communication!
Related Products
To inquire about our products, please leave your email to us and we will contact you within 24 hours.